Pay in installments of $5.54 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 2 - Jul 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
is snake plant dracaena or sansevieria Dracaena zeylanicaDracaena (Sansevieria) zeylanica Dracaena zeylanica is a rhizomatous snake plant with upright, sword shaped leaves marked by soft grey green banding. The foliage rises from the base in a tight clump, giving the plant a calm vertical shape and a muted, natural pattern. The leaves are pointed, slightly fleshy and held in a restrained green palette with fine transverse markings. In a pot, Dracaena zeylanica develops through basal shoots, gradually adding
Dracaena (Sansevieria) zeylanica
Dracaena zeylanica is a rhizomatous snake plant with upright, sword-shaped leaves marked by soft grey-green banding. The foliage rises from the base in a tight clump, giving the plant a calm vertical shape and a muted, natural pattern.
The leaves are pointed, slightly fleshy and held in a restrained green palette with fine transverse markings. In a pot, Dracaena zeylanica develops through basal shoots, gradually adding density around the rhizome.
Flat blades with quiet banding
- Upright, sword-like leaves with grey-green transverse markings.
- Rhizomatous base that gradually adds new shoots around the clump.
- Measured indoor growth with long-lasting foliage.
- Well matched to warm rooms and a sharply draining substrate.
Rhizome, range and container growth
Dracaena zeylanica is accepted botanically under Dracaena, while Sansevieria zeylanica remains the older name many growers still recognise. The species is native to southern India and Sri Lanka, where it grows as a rhizomatous geophyte in seasonally dry tropical conditions.
In a pot, the rhizomes and thick leaves are built for dry intervals, so the plant responds best to a clear wet-dry cycle. New shoots may appear close to the existing leaves, slowly widening the clump over time.
Watering pattern for a dry-season plant
- Light: Give bright indirect light or mild morning/evening sun. In lower light, new growth usually arrives more slowly.
- Watering: Let the pot dry deeply before watering again, then soak evenly and drain fully.
- Substrate: Use a mineral, fast-draining mix with pumice, lava, grit or other coarse components.
- Temperature: Keep warm indoors, ideally above 18 °C, and protect the pot from cold windowsills.
- Feeding: Feed lightly in spring and summer. This rhizomatous plant needs only modest nutrition.
- Repotting: Repot when the rhizomes press firmly against the pot or the mix has become dense.
Early warning signs
- Soft leaf bases: Check for wet substrate, poor drainage or cold conditions around the rhizome.
- Wrinkled leaves: A very long dry spell may leave the foliage slightly folded or dull; water thoroughly once the pot is warm.
- Pale dry patches: Sudden direct sun can mark the leaf surface, especially after a darker indoor position.
- Hidden pests: Look between the leaf bases for mealybugs and wipe the leaves when dust or pests appear.
Placement around pets and children
Dracaena zeylanica should be kept away from pets and small children who may chew leaves. Ingestion may cause digestive upset, and the pointed leaf tips are better placed where they will not be brushed at face height.
Botanical name and synonym
Dracaena comes from the ancient Greek drakaina, meaning female dragon. The epithet zeylanica means “of Ceylon,” referring to Sri Lanka under its historic name. Sansevieria zeylanica remains a widely recognised synonym for the same plant.
Dracaena zeylanica has flat upright leaves, soft banding and steady rhizome growth in a muted green clump.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 471 reviews
Sort
Product Reviews
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top.
The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.)
If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box.
Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT!
The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe.
While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year.
So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
recommand products
Baby Trend Nursery Center Travel Crib with Removable Rock-A-Bye Bassinet, Changing Table, Organizer, and Electronic Music Center and Nightlight,
20.97
Kooper RS2 Lightweight Travel Double Stroller
27.19
Bugaboo Butterfly 2 Stroller
27.20
Bugaboo Butterfly
25.93
Baby Trend Lil Snooze Deluxe Nursery Center | Diamond Geo
26.51